88
Recording Movies
.
To set up the camera to shoot with Prerecord Movie
1.
Align the mode dial with [
b
] (BEST SHOT).
2.
Press [MENU].
3.
Press [
4
], use [
8
] and [
2
] to select the “
r
REC MENU” tab, and then
press [
6
].
4.
Use [
8
] and [
2
] to select “Movie Quality” and then press [
6
].
5.
Use [
8
] and [
2
] to select the movie quality you want to use for
shooting and then press [SET].
6.
Press [SET].
7.
Use [
8
] and [
2
] to select
, and then press [SET].
8.
Use [
8
], [
2
], [
4
], and [
6
] to select the “Prerecord (Movie)” scene and
then press [SET].
This causes
‰
(Prerecord (Movie)) to appear on the monitor screen, indicating
that the camera is prerecording to its buffer.
.
To shoot a Prerecord Movie
1.
After using the above procedure to set up the camera for Prerecord
Movie, point the camera at the subject.
2.
When you are ready to record, press [
0
] (Movie).
This will save the approximately five seconds of action that was prerecorded in
the buffer before you pressed [
0
] (Movie) (two seconds if you are using high
speed movie) and start real-time recording.
3.
Press [
0
] (Movie) again to stop recording.
• To turn off Prerecord Movie recording, align the mode dial with [
P
] (Program
Auto) or [
Ÿ
] (Premium Auto Pro).
• When shooting with the high speed movie “HS30-120” and “HS30-240” setting,
you cannot change the speed (fps) setting while the camera is pre-recording to
the buffer in step 1 of the above procedure. You can change the speed (fps)
setting after you press [
0
] (Movie) to start real-time recording.
