EN-7
General Guide
Pressing [–] reduces the currently displayed number or value
by one, while [+] increases it by one. Holding down either
button will sequentially increase or decrease the displayed
number or value until you release the button. Pressing both
buttons at the same time will return the number or value to its
initial default or recommended setting.
If input of a negative value is allowed, pressing [–] while the
value is flashing on the display will add a minus sign (–) to the
left of the value. Pressing [+] while the value is flashing on the
display changes back to a positive value.
Depending on the operation being performed, [2] (
o
), [3]
(
p
), [5] (EXIT), and [6] (ENTER) key operations are enabled
while the NUM indicator is not shown on the display.
After configuring function settings with the Function (
cs
)
button, you can exit the setting screen by long-pressing [5]
(EXIT). For details, see “
FUNCTION
Button (
cs
) Functions”
(page EN-43).
In the modes listed below the category (group) of the currently
selected type will be shown on the display. You can change
the category, if you want.
• Tones
• Rhythms
• Songs
• Music Presets
1.
Press
bo
CATEGORY
.
Each press of
bo
CATEGORY
selects the first number
of the next sequential category.
• After pressing
bo
CATEGORY
, you can also scroll
forward and back between category names using the
dk
[–] and [+] keys.
• If you do not perform any operation for a while after
displaying a category, the display will automatically
return to the previous screen.
2.
To return to the previous screen, press
cs
FUNCTION
.
• For information about the categories available in each
mode, refer to the “Category” column of the lists.
• You can directly scroll between top entries of categories by
holding down
bo
CATEGORY
as you use the
dk
[–] and
[+] keys to scroll.
Perform the following procedure when you want to return the
Digital Keyboard’s stored data and settings to their initial
factory defaults.
See Function No.73 under “
FUNCTION
Button (
cs
)
Functions” (page EN-43).
[–] and [+] Keys
[2] (
o
), [3] (
p
), [5] (EXIT), and [6] (ENTER)
Keys
[5] (EXIT) Key Long-press
Categories
To check the current category
P i a n o
Category number
Category name
Returning the Digital Keyboard to
Its Factory Default Settings
CTX870IN-E-1A.indd 9
2017/12/18 15:24:55
