Casio ALGEBRA FX 1.0 Plus Manual Download

Page: 11 / 98

19990401

V-Window Memory

You can store up to six sets of V-Window settings in V-Window memory for recall when you
need them.

To store V-Window settings

1. From the Main Menu, enter the GRPH

•

TBL Mode.

2. Press

(V-Window) to display the V-Window setting screen, and input the values

you want.

3. Press

(STO) to display the pop-up window.

4. Press a number key to specify the V-Window memory where you want to save the

settings, and then press

. Pressing

stores the settings in V-Window Memory

1 (V-Win1).

To recall V-Window memory settings

1. From the Main Menu, enter the GRPH

•

TBL Mode.

2. Press

(V-Window) to display the V-Window setting screen.

3. Press

(RCL) to display the pop-up window.

4. Press a number key to specify the V-Window memory number for the settings you want

to recall, and then press

. Pressing

recalls the settings in V-Window Memory

1 (V-Win1).

5-2-4

Controlling What Appears on a Graph Screen

# Storing V-Window settings to a memory that

already contains setting data replaces the
previous data with the new settings.

# Recalling settings causes the current V-Window

settings to be replaced with those recalled from
memory.

Summary of Contents for ALGEBRA FX 1.0 Plus



































































































Search results

Summary of Contents for ALGEBRA FX 1.0 Plus

Reviews:

Related manuals for ALGEBRA FX 1.0 Plus

Brands by name

Popular brands

Casio ALGEBRA FX 1.0 Plus, Manual

Search results

Summary of Contents for ALGEBRA FX 1.0 Plus

Reviews:

Related manuals for ALGEBRA FX 1.0 Plus

Brands by name

Popular brands