Operation Guide 2891
16
You can set the start time of the timer in units of one minute in the
range of 1 to 60 minutes. The watch beeps for 5 seconds when
the end of the countdown is reached. Turning on the watch’s auto
repeat timer feature causes the countdown to restart from the start
time whenever the end of the countdown is reached.
Timer Types
There are two different settings that you can use to configure the
timer as describe below.
•
Repeat Timer
With the Repeat Timer, the countdown stops, the original start
time appears, and the watch beeps for 5 seconds when the
end of the countdown is reached.
•
The “
” indicator appears on the display while the
Repeat Timer is selected.
•
Auto Repeat Timer
The Auto Repeat Time causes timing to restart from the start
time when the end of the countdown is reached.
•
The “
” indicator appears on the display while the Auto
Repeat Timer is selected.
•
The countdown repeats up to 10 times, or until you stop it
manually.
Timer Alarms
❚
Progress Beeper
When the progress beeper is turned on, the watch beeps at the
top of minute 10, 5, 4, 3, 2, and 1 before the end of countdown is
reached, and at second 50, 40, 30, 20, 10, 5, 4, 3, 2, and 1 of the
final minute.
•
If the timer start time is less than 10 minutes, the progress beeper
beeps only for the minutes and seconds that are actually counted
down.
•
See “To turn the progress beeper on or off” for information about
how to turn the progress beeper on and off. The “
” indicator is
on the display while the progress beeper is turned on.
❚
Time Up Alarm
The watch beeps for five seconds when the end of the countdown
is reached.
•
Pressing any button while the beeper is sounding stops it.
Using the Timer
Use the
D
D
D
D
D
button to enter the Timer Mode as shown under
“Modes and Display Screens”.
❚
To turn the progress beeper on or off
In the Timer Mode (countdown can be running or stopped),
press the
A
A
A
A
A
button to toggle the progress beeper on and off.
•
The “
” indicator is on the display while the progress beeper is
turned on.
Indicates progress
beeper on
❚
To configure timer settings
1.
While the current starting
time is displayed in the
Timer Mode, hold down
the
E
E
E
E
E
button for about
two seconds until the start
to flash on the display.
This is the setting screen.
2.
Press the
C
C
C
C
C
(+) and
A
A
A
A
A
(–)
buttons to change the
minutes setting.
•
Holding down either button
scrolls the setting at high
speed.
3.
Press the
D
D
D
D
D
button to
change to the timer type
setting.
4.
Press the
C
C
C
C
C
button to
toggle the timer type
between repeat timer and
auto repeat timer.
•
The “
” indicator appears
on the display while the Auto
Repeat Timer is selected.
5.
When the setting is the way you want, press the
E
E
E
E
E
button to exit the setting screen and return to the timer
mode screen.
•
The display also will exit the setting screen automatically if
you do not perform any operation for about two or three
minutes.
(2 seconds)
Minutes
(–)
(–)
(+)
(+)
Indicates
auto repeat timer
❚
To use the countdown timer
In the Timer Mode, press the
C
C
C
C
C
button to start and stop the
countdown.
•
The time counts down in 1-second steps.
(Reset)
(Start/Stop)
Minutes
Seconds
Current Time
•
Pressing the
A
button while the countdown is stopped
resets to the countdown start time.
•
Pressing the
C
button while the timer countdown is
stopped restarts the countdown.
