Operation Guide 2886
9
5. Press the
A
button to display the
distance and direction between the two
points.
Direction Indications
•
The direction reading indicates the
direction to the destination from your
current location.
•
“– –” will be indicated for the direction (COMPASS) and “0.00” for the
distance (DISTANCE) when the distance between the current location
and your destination is less than 50 meters.
•
To return to the base point record screen, press the
A
button.
•
To change to the Timekeeping Mode or another mode, use the
C
button.
To rename a destination
1. While the base point record screen is
displayed, press the
A
button to display
the destination (GOAL POINT) list.
2. Use the
E
(newer) and
B
(older)
buttons to scroll through the destinations
until the one you want is on the display.
•
Destinations are listed in measurement
date order.
3. Hold down the
A
button for about one
second until the setting menu appears.
•
Keep the
A
button depressed after
the distance and direction screen
appears.
4. After confirming that the arrow ( ) is next
to “EDIT”, press the
C
button to display
the destination name editing screen.
•
The current destination name will be
flashing on the display.
•
To exit this screen without renaming a
destination, move the arrow ( ) to
“CANCEL” and then press the
C
button.
5. Input a location name by using the
E
(+)
and
B
(–) buttons to scroll through
characters at the position where the
pointer ( ) is currently located, and the
C
button to shift the pointer to the right.
•
You can input up to eight alpha-
numeric characters (see below) for a
location name.
•
If you want to input more characters, press the
E
or
B
button
while the pointer is located at the first (leftmost) character.
•
If you want to edit the default name, press the
C
button to move
the pointer to the right and then make the changes you want.
Supported Characters
Letters: A to Z
Numbers: 0, 1 to 9
Symbols: ’, +, –, :, ., /, ?, space
6. When the name is the way you want,
press the
A
button to exit.
Direction
Distance
(Older)
(Newer)
(–)
(Right)
(+)
To delete a destination
1. While the base point record screen is
displayed, press the
A
button to display
the destination (GOAL POINT) list.
2. Use the
E
(newer) and
B
(older)
buttons to scroll through the available
destinations until the one you want is on
the display.
•
Destinations are listed in measurement
date order.
3. Hold down the
A
button for about one
second to display the setting menu.
4. Use the
E
and
B
buttons to move the
arrow ( ) to “CLEAR”.
5. Press the
C
button.
6. Use the
A
button to move the arrow ( )
to “YES” (to delete the destination) or
“NO” (to cancel the delete operation).
7. Press the
E
button to delete the
destination and display the one before it.
(Older)
(Newer)
Using the Timer
The Timer Mode lets you set a start time of up to 60 minutes in 10-
second steps, and then countdown from there in one-second units. The
watch beeps for 5 seconds when the end of the countdown is reached.
Turning on the watch’s auto repeat timer causes the countdown to
restart from the start time whenever the end of the countdown is
reached.
To enter the Timer Mode, press the
C
button four times in the
Timekeeping Mode.
Current Time
Start Time
(Minutes, Seconds)
(4 times)
