Operation Guide 2886
10
■
Timer Types
There are two different settings that you can use in order to configure the
timer as describe below.
Repeat Timer
With the Repeat Timer, the countdown stops, the original start time
appears, and the watch beeps for five seconds when the end of the
countdown is reached.
Auto Repeat Timer
With the auto repeat timer, the timer automatically resets the start time
and continues timing from there when the end of the current countdown
is reached.
•
“AUTOREPEAT” is on the display while the auto repeat timer is
selected.
To switch between the Repeat Timer and Auto Repeat Timer
While the Timer Mode timer is reset to its
start time, press the
B
button to toggle
between the repeat timer and auto repeat
timer.
•
The auto repeat timer screen shows a
repeat count. (Repeat Count: 01 to 30)
To set the timer start time
1. While the current starting time is displayed
in the Timer Mode, hold down the
A
button for about one second until the
minutes start to flash.
2. Use the
C
button to move the flashing
between the minute and the seconds
setting.
•
Set 0:00 for a 60-minute countdown.
3. Use the
E
(+) and
B
(–) buttons to
change the currently selected setting.
•
Holding down the
E
or
B
button
changes the current setting at high
speed.
Repeat steps 2 and 3 as many times as necessary configure the
start time setting you want.
•
The start time can be set in 10-second increments up to 60
minutes.
4. When the setting is the way you want,
press the
A
button to exit the setting
screen.
•
The setting screen also will be exited
automatically if you do not perform any
operation for about two or three
minutes.
To use the countdown timer
• Stop
• Reset
• Start
Start: Press the
E
button.
Stop: Press the
B
button.
Reset: While the countdown is stopped, press the
B
button.
•
Pressing the
E
button while the timer countdown is stopped restarts
the countdown.
●
Time Up Alarm
The watch beeps for 5 seconds when the end of the countdown is
reached.
To stop the alarm
Pressing any button while the alarm is sounding will stop it.
Auto Repeat
Timer Indicator
Repeat Count
Minutes
Seconds
(–)
(+)
Using World Time
World Time lets you display the current time in any one of 141 cities (38
time zones) around the world.
•
When you enter the World Time Mode, the screen for the city that was
displayed when you last exited the mode appears first.
•
The World Time seconds count is linked with the Timekeeping Mode
seconds count.
•
The same 12-hour/24-hour format you select for the Home Time in the
Timekeeping Mode is also applied in the World Time Mode.
To enter the World Time Mode, press the
C
button five times in the
Timekeeping Mode.
World Time
About 1 second
City Name
Time Differential (UTC)
(5 times)
●
Important!
If the World Time Mode time is incorrect, correct the Home Time setting
in the Timekeeping Mode.
•
For information about setting the time, see “Configuring the Watch’s
Basic Settings”.
To search for a city
In the World Time Mode, use the
E
(westward) and
B
(eastward) buttons to
scroll through the cities.
•
Holding down the
E
or
B
button scrolls
at high speed.
•
For more information about city names,
see “City Name List”.
To turn summer time on and off
While the city whose summer time setting
you want to change is displayed, hold down
the
A
button for about one second to toggle
summer time on and off.
•
The “DST” indicator appears on the
display and timekeeping is advanced by
one hour when summer time is turned on.
•
You can turn summer time on or off
individually for each city.
Using Summer Time (DST)
Summer time, or Daylight Saving Time (DST) as is it is called in
some countries, calls for setting clocks ahead one hour during the
summer season. Note that the use of summer time depends on
the country and even the local area.
(Eastward)
(Westward)
