CSN-58III user manual
33
XX80
:
0 ≤ m ≤ 3
;
48 ≤ m ≤ 51
1≤ xL + xH×256 ≤ 72
0 ≤ yL ≤ 255
,
0 ≤ yH ≤ 255
0 ≤ d ≤ 255
k = (Hl + Hh×256)×(yL + yH×256)
Default
No
Notes
[d] k bit is 1 shows the point to print accordingly, the corresponding bit is
0, then it shows that point not print at all
If the image level bytes out of print area, beyond the part will be ignored
This instruction execution according to the image size into the paper,
does’t effect from the ESC 2, ESC 3 line spacing
After the instruction execution, print coordinates are reset to the left
margin position and image content is cleared the bitmap data relationship
with the printing effect is as follows:
This command with a printing function, data transfer and print,
don't need to use the print command
Example
1B 40
1d 76 30 00 03 00 09 00
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF
Define downloaded bit image
Name
Define downloaded bit image
Code
ASCII
:
GS * x y d1...d(x×y×8)
DEC
:
29 42 x y d1 ...d(x×y×8)
HEX
:
1D 2A x y d1...d(x×y×8)
Function
Defines a downloaded bit image using the number of dots specified by x
and y.
x specifies the number of dots in the horizontal direction.
y specifies the number of dots in the vertical direction.
Parameter
range
1 ≤ x ≤ 255
1 ≤ y ≤ 48
x*y ≤ 1536