CSN-58III user manual
32
printing.
If you need to print big graphics,you can divide it into several pieces 8
（
m =
0
、
1
）
or 24
（
m = 32
、
33
）
dots graphics to print.
After filling graphic data,you can continue to fill other information to
make graphic and other information to print simultaneously.
After filling bitmap,you can use ESC J(n=24)command to print,and
also can use LF command to print.But LF command will make paper feed
operation(according to line space to feed paper),and make graphic
continuously between different lines.And can set line space to 0 to avoid
to feed too much paper.(Dot matrix printer may drift when it starts,pls send
data continuously if it breaks line.
Example
1B 40
1b 2a 00 0C 00 FF FF FF FF FF FF FF FF FF FF FF FF
1B 33 00
0A
Print raster bit image
Name
Print raster bit image
Code
ASCII
：
GS v 0
DEC
：
29 118 48 m xL xH yL yH [d]k
HEX
：
1D 76 30 m xL xH yL yH [d]k
Function
Print the transverse modulus image data
，
Parameter as follows
：
m as bit image method
：
m
Model
VerticalDot Density HorizontalDot Density
0,48 Normal
× 1
× 1
1,49 Double-width
× 2
× 1
2,50 Double-height
× 1
× 2
3,51 Quadruple
× 2
× 2
xL
、
xH select the number of data bytes (xL+xH×256) in the horizontal
direction for the bit image.
yL, yH, select the number of data bits (yL+yH×256) in the vertical direction
for the bit image.
[d]k for Some figure data
k for Some figure data bytes
，
k Used to signal hint, doesn’t need to
transfer
Parameter
range
XX58
：
0 ≤ m ≤ 3
；
48 ≤ m ≤ 51
1 ≤ xL + xH×256 ≤ 48
0 ≤ yL ≤255
，
0 ≤ yH ≤255
0 ≤ d ≤ 255
k = (Hl + Hh×256)×(yL + yH×256)
