Case CX135SR, Operator'S Manual

Page: 41 / 186

CHAPTER 3 - INSTRUMENTS AND CONTROLS
3-13
6-34551NA Issued 8-04 Bur
FUNCTION CANCELLATION LEVER
The shape of the function cancellation lever was
designed to prevent the operator from leaving the
operator’s compartment without having raised the
lever beforehand.
The function cancellation lever cancels the hydraulic
controls.
In the raised position, all hydraulic controls are
stopped.
CT02C037 Figure 24
The left-hand control arm is raised along with the
function cancellation lever for better access.
CT02C038 Figure 25
In the lowered position, all hydraulic controls are
operational.
ARM AND UPPERSTRUCTURE SWING
LEFT-HAND CONTROL LEVER
T h e s p e e d o f m o v e m e n t o f t h e a r m o r t h e
upperstructure swing depends on the control lever tilt
angle. In the intermediate position both movements
can be obtained simultaneously.
1. The arm extends.
2. The arm retracts.
3. The upperstructure turns towards the left.
4. The upperstructure turns towards the right.
NOTE: The movements of the machine are shown in
the Control functions decal. See Decals.
CT02C039 Figure 26
CS98M554
Figure 27
WARNING: To access or exit the operator’s
compartment, the function cancellation lever
must be in the raised position. Never forget
this basic requirement.
1
2
3 4
3
2
4
1