28 SAFETY INSTRUCTIONS
327B-330B
SECTION 1
For the personnel and vehicle safety, read carefully the SAFETY INSTRUCTIONS contained in this handbook
Safety locks
Always lock the joint in secured position unless other-
wise specified.
Proceed as follows:
Figure 38
269NS111
D
align the vehicle (front and rear chassis);
D
remove the pin (Figure 38, ref. 1);
D
swing the tie---rod forward to make the holes in the
tie---rod and chassis coincide (Figure 38, ref. 2);
D
insert the pin through the holes and fasten it with the
retaining pin (Figure 38, ref. 3).
Always lock the tipped body when operating in the rear
chassis area.
Proceed as follows:
Figure 39
276NS004T
D
remove the pin (Figure 39, ref. 1);
D
tip the body completely;
D
twist the tie---rod to make the holes in the tie---rod
and chassis coincide (Figure 39, ref. 2);
D
insert the pin through the holes and fasten it with the
split pin (Figure 39, ref. 3).