SAFETY INSTRUCTIONS 13
327B-330B
SECTION 1
For the personnel and vehicle safety, read carefully the SAFETY INSTRUCTIONS contained in this handbook
INTRODUCTION
The instructions and warnings given in this handbook
illustrate the fundamental safety principles for operat-
ing articulated dump trucks.
Figure 1
156NS01
These instructions are not comprehensive. They do not
illustrate all the potential hazards which may arise.
Operators must be aware of all the procedures de-
scribed in this handbook. The procedures advise
against adopting work methods which could cause in-
juries and/or affect integrity of the vehicle.
The procedures are not comprehensive. The Manufac-
turer cannot account for all the possible methods of use
and operation, nor evaluate all the possible conse-
quences.
Consequently, operators must be responsible and
careful at all times, to prevent hazardous situations for
themselves and others.
Use of the vehicle is subjected to respecting the specifi-
cations contained in this manual and safety regulations
set forth by the law in the country where the vehicle is
used. Knowledge of local legislation is mandatory for all
vehicle users.
Read this manual carefully. Contact an expert or call the
Manufacturer if in doubt.
Safety information and symbols
Figure 1 shows a
safety symbol
which is used to attract
the operator’s attention to safety relevant matters. Pay
the utmost care when you see this symbol on the ve-
hicle or in this handbook.
Always follow the recommended safety instructions.
Always read the safety related adhesive labels. Re-
place the labels if they are damaged.
Safety plates and labels on the vehicle are illustrated in
Section 2 --- TECHNICAL DATA.
