manualshive.com logo in svg

Cascadia RTOS1202709CD, User Manual

Share
Download
Cascadia RTOS1202709CD User Manual Download Page 18

 18

3-2. LIVE 

Set values for live display. Navigate through the menu items by pressing the UP/DOWN buttons. 

Menu items in LIVE mode setup

 

OSD:

 Enable/disable on-screen-display. 

SEQUENCE: 

Enable/disable auto sequencing of the screen in full or quad view. 

SEQ-DWELL TIME:

 Dwell time for each channel display in sequential display mode. 

OSD CONTRAST:

 Set the visibility level of the On Screen Display. (OSD) 

CHANNEL: 

Select the channel for applying the following settings by pressing the LEFT/RIGHT 

buttons. 

DISPLAY:

 Enable/disable display of the video channel in live display mode. 

BRIGHTNESS:

 Change the brightness value for the specified channel. 

CONTRAST:

 Change the contrast value for the specified channel. 

HUE:

 Change the hue value for the specified channel. 

SATURATION:

 Change the saturation value for the specified channel. 

 

 

Figure 3.2.1 LIVE mode setup screen

 

 

 

If the values of BRIGHTNESS, CONTRAST, HUE, & SATURATION is changed, the 
video will be recorded as same as changed.

 

Summary of Contents for RTOS1202709CD

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands