Wireless Power Meter
For use with the Cascade Health and Fitness FLUIDPRO Trainer only
Contents
.
1. Power Meter console
2.Cable Ties
3. Sponge
4. HR Transmitter and strap
5. Magnet
6. Clamp bracket set
7. Rubber strip
8. Cadence sensor
9. AAA batteries
Power Meter Console Installation:
1-1.
Insert 2 * AAA batteries in to the console and then mount onto your bicycle handlebars.
1-2.
Attach the Clamp bracket(6) to the back of the console(1) by inserting the provided mounting screw
through the clamp bracket into the console.
1-3.
Spread the bottom of the console clamp apart, than clamp it back together over the handlebar.
1-4.
Turn the screw bar downward, slightly tighten the screw and adjust the console angle for optimal
visibility. Once the position is set, continue to tighten the screw until it is securely attached to the
handlebar. If the bracket is too large to fully tighten around the handlebar then insert the provided
sponge to fill the space so that the bracket can tighten to the handlebar.
