i
ONTENTS
ECOMMENDED HYDRAULIC SUPPLY OPTIONS
R
This Manual provides instructions for installing a Cascade
E-Series Carton Clamp. Follow the suggested installation
procedures for best results. If you have any questions or
need more information, contact your nearest Cascade
Service Department (see back cover).
Read the
WARNING
Statements placed throughout this
Manual to emphasize safety during Clamp installation.
IMPORTANT:
Field alterations may impair performance or
capability and could result in loss of warranty. Consult
Cascade for any required modifications.
Recommended Hydraulic Supply
i
Truck Requirements
1
Installation Procedures
2
Load Troubleshooting
8
Periodic Maintenance
10
E-Series Carton Clamps can be operated with any of the
hydraulic supply arrangements shown below. Refer to
Cascade
Hose & Cable Reel Selection Guide, Part No.
212199, to select the correct hose reel for the mast and truck.
The hose and fitting requirements are:
•
All hoses and fittings for clamp and sideshift functions
should be at least No. 6 with 9/32 in. (7 mm) minimum I.D.
GA0033.ill
Non-Sideshifting
A or B
RH or LH THINLINE
™
2-port hose reel group.
OR
C
Mast single internal hose reeving group.
Sideshifting
A and B
RH and LH THINLINE
™
2-port cable hose reel groups.
OR
C
Mast double internal hose reeving group.
Sideshifting with Solenoid
A
6-N-1 cable/hose reel group
OR
A and C
Cable reel and single internal hose reeving group.
A
B
C
C
Summary of Contents for E Series
Page 13: ......
