Casall Mag Hybrid, Assembly & Operating Instructions

Page: 8 / 16

1
STEP 1
1. Attach the front stabilizer (D) to the main frame (E) using two flat washer (N-1) and allen
bolt (N-3).
2. Attach the rear stabilizer (C) to the main frame (E) using two flat washer (N-1) and allen
bolt (N-3)
After assembly, the Trainer can be adjusted to slightly uneven ground by adjusting the
height of the foot caps at the front and back. The pre-assembled transportation wheels in
the front allow easy moving of the Elliptical and therefore during assembly, need to be
pointing down at the front (45°).
Allen Key(1)
N-3 Allen Bolt M8 *P1.25*20mm (4)
N-1 Flat Washer ?8*?1 9*2t (4)