Casall Mag Hybrid, Assembly & Operating Instructions

Page: 10 / 16

3
STEP 3
3.1 : Please remove the adjusting knob (E-2) from the main frame (E).
3.2 : Release the screw from the lower sleeve and take of the sleeve from the handlebar
post but do not take the sleeve off the lower cable.
3.3 : Insert the handlebar post (B-3) into the main frame (E), then choose the desired
position and tighten the adjusting knob (E-2). Be sure the knob is always tightened.
3.4 : Attach the handlebar (B) to the handlebar post (B-3) using the four flat washers (N-1)
and four allen bolt (N-2) in each side.
3.5 : Connect the lower cable (E-28) and the upper cable (B-9) in the handlebar post.
3.6 : Double check the cables are OK to connection.
3.7 : Put the sleeve into the handlebar post.
3.8 : Set up the screw for the sleeve
Remarks: When you have chosen a desired position, tighten the handlebar post knob until
you hear a
“click”.
Screwdriver (N)
Allen Key(1)
N-2 Allen Bolt M8*P1.25*12mm (4)
N-1 Flat Washer ?8*?19*2t (4)