FILE NAME ( SM_VersaTouch.pmb ras 04-01-03303303)
Casablanca Fan Co. - Factory Service Department - Technical Library
Chapter (5)
V- 5.44
RF ( RADIO FREQUENCY ) REMOTE CONTROL OPERATION
Operates one or sevral fans up to a maximum distance of 35 feet
Three forward and three reverse speeds
Full light dimming with memory
Includes bracket for convenient wall mounting
Remote and fan can be set to any one of 32 separate channels
The RF Fan and Light Control Consists of a Transmitter and Receiver .
TRANSMITTER - Remote Control
Operates with a 9 volt Alkaline battery
Channel has been preset at factory to match the fan receiver
Remote and fan channel numbers can be changed
One remote can control several fans ( all fan channels must be set the same )
Extra Remotes can be purchased to be able to control fan from other locations
( with - in 35 feet distance ).
FAN OPERATION
Start Fan : Press selected fan speed button - LOW, MEDIUM, HIGH
Turn Fan Off : Press OFF button
Reverse Fan : Press Forward /Reverse button while fan is on or off
LIGHT OPERATION
Turn on :
Press LIGHT /DIMMER button
Dimmer :
Press LIGHT/DIMMER button in excess of 0.7 seconds,
it becomes a dimmer .
Turn off :
Press LIGHT /DIMMER button again
Auto - resume :
After turning light off, when turned back on the light
resumes to its previous setting.
RF ( RADIO FREQUENCY ) REMOTE CONTROL OPERATION
Operates one or sevral fans up to a maximum distance of 35 feet
Three forward and three reverse speeds
Full light dimming with memory
Includes bracket for convenient wall mounting
Remote and fan can be set to any one of 32 separate channels
RECEIVER --Circuit Board In Fan Switch housing
A circuit board installed in the fan ( See manual for location )
Receives the signal transmitted by the remote control
Channel can be changed
( WRF 2 REMOTE CONTROL )
RF - REMOTE CONTROL
