FILE NAME ( SM_VersaTouch.pmb ras 04-01-03303303)
Casablanca Fan Co. - Factory Service Department - Technical Library
Chapter (5)
V- 5.45
RF REMOTE CONTROL TROUBLESHOOTING
RF ( RADIO FREQUENCT )
PROBLEM POSSIBLE REMEDIES
FAN WILL NOT START
* Check main circuit fuse, circuit breaker, or wall switch position.
* Check all wire connections, making sure the power is off during
this inspection.
* Check the wire pin connections in the switch housing are making
good connection.
* Check the receiver and transmitter dip switches are set at the
same frequency setting.
* Battery weak - install new fresh Alkaline battery.
FAN NOISY DURING OPERATION
* Check and tighten all motor housing screws, ( snug not over tight ).
* Check to make sure the screws which attach the fan blade
holders to the motor hub are tight.
* Check to make sure wire nut connectors in switch housing are
not ratteling against each other or against the metal walls of
switch housing or fallen off the wire splices tighten or adjust.
Before Requesting Service : Please follow this troubleshooting guide before
contacting your dealer for assistance.
Never Lubricate This Fan :
The precision motor at the heart of your Casablanca fan features sealed bearings
that are lubricated for life. Do not attempt to oil the motor.
Changing Light Bulbs :
Be sure to turn power to fan
Off
at the wall switch or circuit breaker before
changing light bulbs. Replace bulbs same type as removed from the fixture.
Each fan is rated for maximum
Total
wattage of lighting.
Exceeding the rated maximum allowable wattage for the fan will burn out the
fan electronics module and void the warranty.
