background image

13

L

a

 F

Leur

For questions or to locate the nearest Casablanca Authorized Service Center,

call 1-888-335-5247 toll-free, or visit us on the Web at  www.casablancafanco.com.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This  device  must  accept  any  interference  received,  including  interference  that  may  cause  undesired  operation. 

 

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the 

FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residental installation. 

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communication. However, there is no guarantee that the interference 

will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by 

one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

NOTE:  Any changes or modifications to the transmitter or receiver not expressly approved by Casablanca Fan Company 

may void one’s authority to operate this remote control.

CARE RECOMMENDATIONS

Fan Finishes

•  For cleaning, a soft brush or lint-free cloth should be used to prevent scratching the finish.

•  A vacuum cleaner brush nozzle can remove heavier dust.

•  Surface smudges or an accumulation of dirt and dust can be removed easily by using a mild detergent and slightly dampened 

soft cloth. An antistatic agent may be used, but 

never use abrasive cleaning agents

 as these will damage the finish.

Blades

•  Wood-finish blades should be cleaned with a furniture polishing cloth. Occasionally, a light coat of furniture polish may 

be applied for added protection and beauty.

•  For painted and high-gloss blades,  surface smudges or an accumulation of dirt and dust can be removed easily by using a 

mild detergent and slightly dampened soft cloth. An antistatic agent may be used, but 

never use abrasive cleaning agents

 

as these will damage the finish.

No Need for Lubrication

• 

Never lubricate this fan! 

The precision motor at the heart of your Casablanca fan features sealed bearings that are lubricated 

for life. 

•  Do not attempt to oil the motor.

Changing Lightbulbs

•  Be sure to turn the power to OFF at the wall switch or circuit breaker before changing lightbulbs.

•  Replace bulbs with the same type as you removed from the light fixture. 

•  The maximum wattage rating for this fan’s light kit is 300 watts.

 

PRODUCT SPECIFICATIONS

Collection:

 

Cosmopolitan Collection by Casablanca

Model name:

 

La Fleur

Model number:

 

P2GxxH

Dimensions: 

A = 12

 

B = 22

 

C = 3

 

D = 12.18

 

E = 5.6

Weight:

 

33 lbs.

Motor:

 

188 x 20 mm - C1LT type

Blade span:

 

56 inches

Blade iron pitch:

 

15 degrees

No. of blades:

 

Technology:

 

Prime•Touch W-505

Lightbulb type:

 

(2) 60-watt G16.5 bulb (Candelabra-base)

Airflow:

 

5,900 cfm

Electricity Use:

 

69 watts

Airflow Efficiency:

 

86 cfm/watt

NOTE:

  Dimension 

B includes light

fixture and glass.

Summary of Contents for La FLeur














Reviews: