CAS PR-T Series, Service Manual

Page: 9 / 39

PR-T Service Manual
9 8/31/2015
< Modes >
2.1.1. SPAN Calibration Setting (C-3)
(1) Pressing and holding “Calibration Switch” press [POWER] key.
After “CAL” message blinks three times and shows the version of scale, it displays “CAL 1”
message.
(2) Press [ZERO] to display “CAL-3”.
(3) Press [TARE] key and then it displays “zero ” message.
(4) Press [TARE] key and then it displays “midup” message
(5) Load middle weight (ex:1/3 full capacity) on the platform
(6) Press [TARE] key and then it displays “span ” message
(7) Load full weight on the platform
(8) Press [TARE] key and then it displays “middn” message
(9) Load middle weight (ex:1/3 full capacity) on the platform
(10) Press [TARE] key and then it display “CAL 3” message
2.1.2. C4 Setting
1) C4-1 Setting
BIT 6~7 Initial Zero range
3 5%
2 10%
1 3%
0 2%
BIT5 Tare Type
0 Proper tare
1 Full Tare
BIT4
BIT 2~3
Successive tare
3 (+), (-) Direction successive Tare
2 (-) Direction successive Tare
1 (+) Direction successive Tare
0 One Time tare
BIT1
BIT0
2) C4-2 Setting
BIT7
BIT6 Use PLU Tare 1 Use
BIT5 Use PLU Name
0 Don't use
1 Use
BIT4 Use Daily Total
0 Don't use
1 Use
BIT3 Clear Price 0 Don't clear