CAS PR-T Series, Service Manual

Page: 8 / 39

PR-T Service Manual
8 8/31/2015
2. Calibration
2.1. General Calibration
Pressing and holding calibration switch press [POWER] key to go to calibration mode.
User can move to other mode by using [ZERO] key in the calibration mode.
User also moves to other sub-modes for each mode by using [TARE] key.
Please simply follow below procedure to move to other mode.
(1) Calibration Mode: Pressing and holding “Calibration Switch” press [POWER] key.
(2) It displays “CAL-0” after “CAL”, and it blinks the version of scale three times.
(3) Selecting menu: press [TARE].
(4) ENTER(Setting) : [TARE] key
MODE Function
CAL 1
Display normalized AD
CAL 2
Display Keypad infomation-
CAL 3
Weight Setting Mode
“UnLoad” → [TARE] →
“MIDD”
→
[TARE] after loading for mid-capacity weight
→
“FULL”
→
[TARE] after loading for Full weight
→
“MIDD” → [TARE] after loading for mid-capacity weight → “END”
CAL 4 Option Setting ( Table 1
참조
)
CAL 5
Display filtered Raw ADx
CAL 6 Function setting on each Key ( Table 2
참조
)
CAL 7
% Calibration
CAL 8
Battery calibration
CAL 9 Gravity constant
CAL 10
Set calibration factor
“Unit”  [TARE]  select 0, 1 (0:kg, 1: lb)  [TARE]
“CAPA”  [TARE]  select capacity  [TARE]
“MCAPA”  [TARE]  select mid-capacity  [TARE]
“W-dP”  [TARE]  Select Decimal Point  [TARE]
“ 1 d ”  [TARE]  Select division  [TARE]
“Dual”  [TARE]  Enable dual interval (0:disable, 1:enable)  TARE
CAL 11
Set nation(00 : OIML , 01 : NTEP , 02: KOREA)