Carter Talon GSR 150 R2, Owner'S Manual

Page: 25 / 69

22
Figure 14
REPAIR
C. Front Wheel Alignment
a . The front wheels should be “toe-in” from 1/8” to 1/4”. To check for alignment, measure
distance A and B between the centerline (CL) of the wheels. The proper toe-in dimension A
should be 1/8” – 1/4” greater than dimension B.
b . To adjust the alignments, loosen the lock nuts on both sides of the Front Tie Rods. To make
Dimension B smaller, turn the rod to left. Adjust the rod to right direction to make
Dimension B larger. After adjusting to the desired length, tighten the lock nut against the rod end.
Recheck the dimensions for proper alignment.
B
A
RIGHT ROATE
RIGHT ROATE
LEFT ROATE
LEFT ROATE
CL
CL
LOCK NUT, FR.
WHEEL TIE ROD
FR. WHEEL
TIE ROD