Carter Talon GSR 150 R2, Owner'S Manual

Page: 19 / 69

16
C. Passengers
The vehicle allows for two riders only. Combine
maximum weight of driver and the passenger should
not exceed 180kg or 400lbs.
D. Seat Adjustment
The seat must always be securely fastened in the
position which best affords the operator control of
the foot pedals, steering wheel, and the remote
stop button.
a . Pull seat adjustment handle upward to disengage
seat slide.
b . Move seat to desired position.
c . Be sure seat adjustment handle snaps back into
place and that seat is locked into position.
R
D
ADJUSTING NUT #1 ，
REVERSE CABLE
ADJUSTING NUT #2 ，
REVERSE CABLE
Figure 4
Figure 3
Before attempting to adjust the seat, ensure that kart engine is stopped.
Never operate this Kart when the provided seat is not securely fastened, to
do so could result in a strong possibility of severe personal injury or loss of life.
Before attempting to adjust the seat, ensure the kart engine is stopped.
E. Reverse Adjustment
a . Push forward the reverse lever to the "D"
position so that the unit can move forward, pull
back the lever to "R" so that the unit can move
backward. (See Fig.4)
b . When reverse lever is in the drive position,
there needs to be 1/2 inch of freeplay in the reverse
level. If the adjustment is not correct, then loosen
the lock nut #2, then adjust lock nut #1 to the
proper amount of freeplay. Sometimes you may
need to adjust the freeplay more or less than 1/2 inch.
WARNING
WARNING
２
１
OPERATION
Always stop the kart before changing gears.