15
PROGRAMMING
The cabinet must be plugged in and plumbed by a professional technician. Follow these steps to pro-
gram your growing cycles. It has 10 growing zones and the home screen has a button for each zone.
NOTE: The GC52 GardenChef cabinet is intended for growing in media that contains an ade-
quate amount of nutrients for growing a single cycle. The best media would be potting soil.
Since the cabinet is directly plumbed to the building water supply, nutrients cannot be added, so
it is not intended for growing in hydroponic media, which contains no nutrients.
HOME SCREEN
1) Select a zone on the HOME screen (1-10)
2) Select CHANGE SEED on the ZONE screen
3) Choose your seed from the list on the SEED LIST.
NOTE: there are 4 screens for the list and you can
scroll by pressing the NEXT button to advance to the
next screen. Once you select a seed, the screen will
revert to the ZONE screen.
4) Press RESTART CYCLE
5) Press the HOME button to return to the home screen
6) Repeat this procedure for each zone where there will
be plants. Otherwise, keep/set them for NONE.
ZONE SCREEN
FAVORITES ZONE
SCREEN
SETTING UP YOUR GROWING CYCLES
On the HOME screen you will see 10 buttons, one for each drawer, which can hold two garden flats with
5” propagation domes. There is space for 20 flats in the cabinet. The cabinet comes pre-programmed
with a list of plants, plus a few empty spots where you can put in additional plants. To set your seed se-
lection, follow this procedure for each zone.
PLANTING ZONES
1
2
3
4
5
6
7
8
9
10
SELECTING PLANTS FOR EACH GROWING DRAWER