8
START UP (continued)
Continued on next page
PRIMING THE EJECTION PUMP (continued)
7) Access the setup page again by pressing SETUP on the HOME screen.
8) Press SET RESERVOIR
9) Confirm that the drain line is connected or leads to an outside reservoir
10) On the RESERVOIR screen press DRAIN and confirm that the pump is turning by feeling for vibra-
tion or listening for a vibrating sound
11) Find the gray ball valve inside the reservoir; turn it to the OPEN position (Fig. 2)
12) Wait until a steady stream of water is ejecting from the open valve
13) Close the valve (Fig. 3) and CANCEL drain
The pump is now primed to drain the reservoir between watering.
HOME SCREEN
SET UP SCREEN
Fig. 3
Priming valve
in CLOSED
position
Fig. 2
Priming valve
in OPEN
position
RESERVOIR SCREEN
Drain/Cancel
button
