-7-
Password”. the default setting is Shock Control, when the tracker begin to move, the tracker begin upload the
tracking, the tracker status on the platform will change to online immediately. if the tracker stop moving, the
tracker will stop upload the tracking and turn off GPS & GPRS to go to sleep mode , a few minutes later the
tracker status on the platform also will change to offline.
If the tracker is always online, the tracker will send tracker status to platform all the time, but this will cost
more data charge and car battery power, and if the car will park long time or the car battery is old, this maybe
cause the car battery power low and can not start car engine, this working mode is not recommended .
7. Set GPS Mode: GPSON / SHOCKCONTROL
Send SMS “GPSON*123456” (GPS module Keep ON all the time even the tracker stop moving) or
“SHOCKCONTROLGPS*123456” (Turn off GPS after the tracker stop moving 10 minutes) to the tracker,
“GPSON” or “SHOCKCONTROLGPS” is a command, “123456” is the tracker password, if the operation is
success, the tracker will send back the information “GPS: Keep ON” or “GPS: Shock Control”, if the password
is not right, the operation is fault, the tracker will send back information “Wrong Password”. the default setting
is Shock Control, when the tracker begin to move, the tracker turn on GPS, if the tracker stop moving, the
tracker will turn off GPS to save car battery power.
The GPS module keep ON can get better signal and can locate very fast, but this will exhaust more car
battery power, and if the car will park long time or the car battery is old, this maybe cause the car battery power
low and can not start car engine, we do not recommend this working mode.
8. Check Tracker ID:
The tracker ID is print on the label of the tracker, if the label is missing, send SMS “ID*123456” to tracker,
in which, “ID” is the fixed command and “123456”is the password. Having successfully been made, there will
be a SMS “ID: 801201512345678”, in which, “801201512345678” is the ID and every tracker corresponds to
the only number. This number is used to differ the tracking uploaded to the website from others. the last 7
digital number of the tracker ID is the user name and password of the tracker on the platform, for example the
tracker ID is : 801201512345678, and then the user name on the platform of this tracker is : 2345678, and the
platform password for this user name also is :2345678 or 123456,user can login the platform
www.999gps.net
to change the password.
9. Set the upload time interval
The GPS location information upload time interval can be set from 30 to 999 seconds. Send SMS
“INTERVAL*123456*xxx” to tracker, “INTERVAL” is a command, “123456” is password, “xxx” is the interval
time, which can be set from 30 to 999 seconds. The tracker will send back information “Set Interval xxx OK”, if
the password is not right, the operation is fault, the tracker will send back information “Wrong Password”. 30
seconds is the default interval time. Longer upload interval time can save battery and GPRS data cost, but this
will make the total mileage to more error.
