-11-
success, the tracker will send back the location information with Google map link to the sender. User click the
link, the location in google map will display, the SMS example is as follow:
https://maps.google.com/maps?q=22.67680N,114.15188E
Battery:88%
4. LBS Locate with Google map link without GPS signal
After sending SMS or calling the tracker to trigger locate, if the tracker can not receive GPS signal or GPS
signal weak (underground park or indoor etc), the tracker will change to LBS locate (located by GSM network
base station), and reply a location with Google map link to the caller or sender. User click the link, the location
in google map will display like above, the SMS example is as follow:
No GPS signal, Just Cell ID Location:
http://maps.google.com/maps?q=N22.6775,E114.1518
Note: this location is locate by GSM base station ID, the precision is not very high, in the city maybe 30-50
meters, in the country mabe over 1 km, so the location is only used for reference.
If the LBS can not get the location either, the tracker will reply “Can not get location, please try again later”.
5. Arm / Disarm (Shock Alarm) by sending SMS
Send SMS “SHOCKALARMON*123456” to tracker, “SHOCKALARMON” is a command, “123456” is
password, the tracker will send back the information “Set Shock Alarm ON” to indicate the operation is success
and go to arm state, if the password is not right, the operation is fault, the tracker will send back information
“Wrong Password”.
After go to shock alarm state, the system will check shock sensor, if the shock sensor is trigger (
only
continuously shock can trigger the shock alarm to avoid trigger by mistake
), the tracker will send alarm
and location information by SMS to the authorized phone number, and send the alarm information to the
website server, also the tracker will call the authorized number A first, if no answered then B and C, if 3
authorized all no answered, then stop calling, If the tracker is triggered continually, every authorized phone will
