Fig 6
Fig 7
Fig 8
Cleaning the inside & outside of the mist guiding tube,and the
atomizing head
1. Rotate counterclockwise to unscrew connecting hose of the main unit
and the atomizing head as shown in Fig 1.
2. Hold the main unit with one hand, press the spring switch of the mist guidi-
ng tube with the other hand at the same time as shown in Fig 2, and remove
the main unit in Fig 3.
3. Rotate the lower cover of the tube clockwise to remove the cover, and
then take out the atomizing head assembly as shown in Fig 4.
4. Clean the dirt inside the tube with a long-handled soft brush as shown in
Fig 5, and then wash the tube in the sink.
5.Use a screwdriver to poke the small hole in the back of atomizing head
assembly, and take out the atomizing head for cleaning as shown in Fig 6,
and wipe the center of it with a damp soft cloth.
6.When cleaning the components of the float, first rotate the upper shell of the
float clockwise and take it out, and then take out the foam of the float as
shown in Fig 7.
7.Wipe the upper shell of the float with a clean damp cloth, use a soft brush to
clean the lower part of the float as shown in Fig 8, and then put it in sink to clean
it.
Page 10
Foam
