– 1 –
TH
2 -EN
1
21-EN
2
Timer operation
Use the wired remote controller for timer setting if it is
also in use.
ON timer and OFF timer
Setting TIMER
1
Push ON / OFF TIMER button ( or ) during
operation.
Press the ON or OFF TIMER buttons as required.
•
The previous timer setting is displayed and
flashes along with ON / OFF timer display.
Set the timer to the desired time.
Each press of the TIMER button changes the time
in ten minute steps.
Pressing the TIMER button continually changes
the time in one hour step.
2
SET
button
Press the SET button to set the timer.
The timer time is indicated and the timer starts.
Cancelling TIMER
3
CLR
button
Press the CLR
button to cancel the timer
setting.
CAUTION
•
When you select the timer operation, the remote
controller automatically transmits the timer signal to
the indoor unit at the specified time. Therefore, keep
the remote controller in a location where it can
transmit the signal to the indoor unit properly.
Otherwise, the time lag of up to 15 minutes will occur.
•
If you do not press the SET
button within 30
seconds after setting the time, the setting will be
cancelled.
Once you select the timer operation mode, the settings
are saved in the remote controller.
Thereafter, the air conditioner will start operating under
the same conditions when you simply press the ON /
OFF button of the remote controller.
If the clock display is flashing, you cannot set the timer.
Follow the instructions in the section “Setting the clock”
and then set the timer.
Combined timer (Setting both ON
and OFF timers simultaneously)
OFF timer —> ON timer
(Operation —> Stop —> Operation)
This feature is useful when you want to stop the air
conditioner after you go to sleep, and start it again in
the morning when you wake up or you return home.
Example:
To stop the air conditioner and start it again next
morning.
Setting combined TIMER
1
Press the OFF TIMER button to adjust the
OFF timer.
2
Press the ON TIMER button to adjust the
ON timer.
3
Press the SET
button.
Operation
Operation again
Stop
ON
ON
2
3
1
OFF
OFF
PRESET
MODE
FAN
ON
OFF
SWING
CHK
FILTER
CLOCK
FIX HI-POWER
CLR
SLEEP
SET
Automatic operation
(auto changeover)
Start
1
START/STOP button ( )
Press this button to start the air conditioner.
2
Mode select button (MODE)
Select A.
3
Temperature button ( )
Set the desired temperature.
4
Fan speed button (FAN)
Select one of
LOW , LOW
+
,
MED
, MED
+
, HIGH
.
•
The
OPERATION lamp (green) on the signal
receiving unit lights.
The operating mode is selected in accordance with
the room temperature and operation starts after
approximately 3 minutes.
•
If the “A” mode is uncomfortable, you can select the
desired conditions manually.
Stop
START/STOP button ( )
Press this button again to stop the air conditioner.
In the Cool, Dry, or Auto (cooling) mode, the fan runs
for 10 minutes (or more) for self clean operation.
2
3
1
4
PRESET
MODE
FAN
1115350277.indd 12
9/27/2018 8:57:12 AM
