Installing Heat Reclaim Ventilation
Failure Definition
1. Failures and Remedies
Check against following symptoms in case the unit does not run normal.
Symptoms
Causes
Remedies
Total Breakdown
Power devices fail?
Restart after service
Fuse burnt out or breaker cut off?
Replace fuse or reset breaker
Standby indicator activated?
The unit is right in the prewarming or
precooling process prior to running status
(refer to Wire Control Button Definition).
Low Air Displacement and High
Noise Level.
Filter or heat exchange components
blocked?
Refer to "Maintenance"
High Air Displacement and High
Noise Level.
Filter or heat exchange components
installed in prescribed positions?
Refer to "Maintenance"
2.
In case that any of the following failures occur, please take measures below in the first place and then
contact concerned distributors.
When unusual conditions (e.g., burnt smell) happen to heat exchanger, please immediately shut off power and
contact concerned distributors.
Under such conditions, continued operation may lead to failure, electric shock and fire accident.
When safety devices, such as fuse, breaker or creepage breaker, frequently jump off, or switch cannot work as
usual, do not turn on power.
Remedy: Keep Power Off
When control buttons fail, turn off main power switch.
3. Heat Reclaim Ventilation Failure Codes:
(indicated only on wired controller matched with heat reclaim ventilation)
When failure codes below is indicated on wired controller, please immediately stop operation, shut off manual
power switch and contact concerned distributors or contact after service staff.
Name
Code
Definition
Indoor Ambient Temperature Sensor Failure
E1
Indoor ambient temperature sensor fails
Outdoor Ambient Temperature Sensor Failure
E2
Outdoor ambient temperature sensor fails
Limit Switch 1 Failure
E3
Air door adjustor 1 or relevant parts fail
Wired Controller and PCB Communication Failure
E8
Communication connections improper or
control wire control, PCB damaged
CAUTION: Service job shall be undertaken by specialists. In case of other failures, please stop operation and
inform concerned distributors.
Debugging Prior to Operation:
Recheck after completing all installation work. While rechecking, refer to all installing notices in this manual. In case of
any inconsistency, please make immediate correction. After normal operation is confirmed, the manual shall be kept
carefully by users.
Before operating the unit, users shall carefully read the manual; when the unit is to be resold to other new users,
please transfer invoice and manual to new users to facilitate future service.
EN
G
LI
SH
26
Summary of Contents for XCT7 40VH A-7G Series
Page 36: ...The manufacturer reserves the right to change any product specifications without notice...
Page 98: ...Le fabricant se r serve le droit de modifier les sp cifications du produit sans pr avis...
Page 129: ...Der Hersteller beh lt sich das Recht vor Produktspezifikationen ohne Vorank ndigung zu ndern...
Page 191: ...O fabricante reserva se o direito de alterar as especifica es do produto sem aviso pr vio...
