![background image](http://html.mh-extra.com/html/carrier/weathermaster-50hc04/weathermaster-50hc04_service-and-maintenance-instructions_2560343036.webp)
36
EconoMi$er
®
IV Standard Sensors
A functional view of the EconoMi$er is shown in Fig. 67. Typ-
ical settings, sensor ranges, and jumper positions are also
shown. An EconoMi$er IV simulator program is available to
help with EconoMi$er IV training and troubleshooting.
OUTDOOR AIR TEMPERATURE (OAT) SENSOR
The outdoor air temperature sensor (HH57AC074) is a 10 to
20 mA device used to measure the outdoor-air temperature.
The outdoor-air temperature is used to determine when the
EconoMi$er IV can be used for free cooling. The sensor is fac-
tory-installed on the EconoMi$er IV in the outdoor airstream.
See Fig. 68. The operating range of temperature measurement
is 40°F to 100°F (4°C to 38°C).
Fig. 67 — EconoMi$er IV Functional View
Fig. 68 — Supply Air Sensor Location
SUPPLY AIR TEMPERATURE (SAT) SENSOR
The supply air temperature sensor is a 3 K thermistor located at
the inlet of the indoor fan. See Fig. 68. This sensor is factory
installed. The operating range of temperature measurement is
0°F to 158°F (-18°C to 70°C). See Table 66 for sensor tem-
perature/resistance values.
The temperature sensor looks like an eyelet terminal with wires
running to it. The sensor is located in the “crimp end” and is
sealed from moisture.
OUTDOOR AIR LOCKOUT SENSOR
The EconoMi$er IV is equipped with an ambient temperature
lockout switch located in the outdoor airstream which is used
to lock out the compressors below a 42°F (6°C) ambient tem-
perature. See Fig. 60.
EconoMi$er IV Control Modes
Determine the EconoMi$er IV control mode before set up of
the control. Some modes of operation may require different
sensors. The EconoMi$er IV is supplied from the factory with
a supply-air temperature sensor and an outdoor-air temperature
sensor. This allows for operation of the EconoMi$er IV with
outdoor air dry bulb changeover control. Additional accesso-
ries can be added to allow for different types of changeover
control and operation of the EconoMi$er IV and unit.
OUTDOOR DRY BULB CHANGEOVER
The standard controller is shipped from the factory configured
for outdoor dry bulb changeover control. The outdoor air and
supply air temperature sensors are included as standard. For
this control mode, the outdoor temperature is compared to an
adjustable set point selected on the control. If the outdoor-air
temperature is above the set point, the EconoMi$er IV will ad-
just the outside air dampers to minimum position. If the out-
door-air temperature is below the set point, the position of the
outside air dampers will be controlled to provided free cooling
using outdoor air. When in this mode, the LED next to the free
cooling set point potentiometer will be on. The changeover
temperature set point is controlled by the free cooling set point
potentiometer located on the control. See Fig. 69. The scale on
the potentiometer is A, B, C, and D. See Fig. 70 for the corre-
sponding temperature changeover values and Fig. 71 for damp-
er leakage.
Fig. 69 — EconoMi$er IV Controller Potentiometer
and LED Locations
SUPPLY
AIR TEMPERATURE
SENSOR MOUNTING
LOCATION
SUPPLY AIR
TEMPERATURE
SENSOR
(SEALED
INSIDE CRIMP
END)
IMPORTANT: The optional EconoMi$er2 does not
include a controller. The EconoMi$er2 is operated by a
4 to 20 mA signal from an existing field-supplied control-
ler. See Fig. 62 for wiring information.
Summary of Contents for WeatherMaster 50HC04
