UC Open XP/UC Open XP IO
25
You can use the following items as a local user interface to an Open controller. These items let you access the
controller information, read sensor values, and test the controller.
NOTE
At the present time, Field Assistant is the required local access user interface for UC Open XP start-up,
commissioning, operation, and troubleshooting. The 3 versions of BACview only provide rudimentary driver
information.
Connect...
To the controller's...
For...
BACview6 Handheld
keypad/display unit
Local Access port
Temporary user interface for driver
parameter access
Virtual BACview
software
running on a laptop
Local Access port*
Temporary user interface for driver
parameter access
BACview6
keypad/display unit
Rnet port
Permanent user interface for driver
parameter access
Field Assistant
Local Access port*
Temporary user interface for start-up,
commissioning, troubleshooting, etc..
* Requires a USB Link (USB-L)
These are accessory items that do not come with the controller.
See the
BACview Installation and User Guide
for instructions on connecting and using the BACview display.
Local access to the UC Open XP
Summary of Contents for UC Open XP
Page 2: ......
Page 8: ...Introduction 4 UC Open XP UC Open XP IO...
Page 42: ......
Page 43: ......