9
10
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is
available.
1. Press the
MODE
button to select COOL, HEAT,
(cooling & heating models only) or FAN mode.
2. Press the
TEMP
buttons to set the desired
temperature. The temperature can be set
O
O
O
O
within a range of 17 C(62 F)~ 30 C(88 F) in
O
O
1 C/2 F increments.
3. Press the
FAN SPEED
button to select the
fan speed in four steps- Auto, Low, Med,or High.
4. Press the
ON/OFF
button to start the air
conditioner.
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
NOTE
Dehumidifying operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit illuminates.
1. Press the
MODE
button to select DRY mode.
2. Press the
TEMP
buttons to set the desired
temperature. The temperature can be set
O
O
O
O
within a range of 17 C(62 F)~ 30 C(88 F) in
O
O
1 C/2 F increments.
3. Press the
ON/OFF
button to start the air
conditioner.
In the Dehumidifying mode, you can not switch
the fan speed. It has already been automatically
controlled.
NOTE
Auto operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit illuminates.
1. Press the
MODE
button to select Auto.
2. Press the
TEMP
button to set the desired
temperature. The temperature can be set
O
O
O
O
within a range of 17 C(62 F)~ 30 C(88 F) in
O
O
1 C/2 F increments.
3. Press the
ON/OFF
button to start the air
conditioner.
3
1
2
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, Heating and
Dehumidifying by sensing the difference between the
actual ambient room temperature and the setting
temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
NOTE
Adjusting air flow direction
Use the AIR DIRECTION and SWING buttons to
adjust the Up/Down airflow direction.
1. When press the AIR DIRECTION button, the
o
horizontal louver will move at an angle of 6 .
Keep pressing the button to move the louver to
the desired position.
2. Press the SWING button , the horizontal
louver would swing up/down automatically.
Press it again to stop.
NOTE:
When the louver swing or move to a
position which would affect the cooling
and heating effect of the air conditioner,
it would automatically change the swing/
moving direction.
1
2
Carrier
MODE
FAN SPEED
TEMP.
AIR DIRECTION
SWING
LED
SLEEP
TURBO
CLOCK
TIMER
CANCEL
RESET
F/C
AUTO
SET TEMP.
CLOCK
SPEED AUTO
ON
OFF
4
1
2
Carrier
MODE
FAN SPEED
TEMP.
AIR DIRECTION
SWING
LED
SLEEP
TURBO
CLOCK
TIMER
CANCEL
RESET
F/C
COOL
SET TEMP.
CLOCK
SPEED AUTO
ON
OFF
3
Carrier
MODE
FAN SPEED
TEMP.
AIR DIRECTION
SWING
LED
SLEEP
TURBO
CLOCK
TIMER
CANCEL
RESET
F/C
DRY
SET TEMP.
CLOCK
SPEED AUTO
ON
OFF
2
1
Carrier
MODE
FAN SPEED
TEMP.
AIR DIRECTION
SWING
LED
SLEEP
TURBO
CLOCK
TIMER
CANCEL
RESET
F/C
DRY
SET TEMP.
CLOCK
SPEED AUTO
ON
OFF
Summary of Contents for split room air conditioner remote control
Page 1: ...2020550A6722...
