Carrier split room air conditioner remote control, Manual

Page: 4 / 8

Function buttons(continued)
12
5 6
10
11
o
The temperature setting (from 17 C(62 F)
o
to 30 C(88 F)) will be displayed. If FAN
mode is selected, there will be no display.
Indicators on LCD
SLEEP Button
Select this function during the sleeping time. It
can maintain the most comfortable temperature
and save energy. This function is available on
COOL, HEAT or AUTO mode only .
TIMER Button
Used to initiate the AUTO-ON/AUTO-OFF time
program, in conjuction with the & buttons.
13
14
15
Press this button to cancel ON timer and OFF
timer.
When push this button, the Ionizer/Plasma
Dust Collector(depending on models) is
energized and will help to remove pollen
and impurities from the air.
CANCEL Button
IONIZER Button(on some models)
Transmission Indicator
Temp. display
Clock display
Timer display
Lock display
Fan speed display
Sleep Display
Mode display
ON/OFF display
This transmission indicator lights when
remote controller transmits signals to the
indoor unit.
Displays the current operation mode. Include
AUTO, COOL, DRY, HEAT(cooling only type
without), FAN ONLY and back to AUTO.
Displayed by pushing the ON/OFF button.
Push the ON/OFF button again to disappear.
The current time is indicated.(0 24 hours)
The time set for timer operation is indicated.
(0 24 hours)
Displayed by pushing the LOCK button.
Push the LOCK button again to disappear.
Displays the selected fan speed, AUTO
and three fan speed levels "LOW" "MED"
"HIGH" can be indicated. Displays AUTO
when the operating mode is either AUTO
or DRY.
Display by pushing the SLEEP button. Push the
SLEEP Button again to disappear.
In the illustration, all displays are indicated for
the sake of clarity. During operation, only the
relevant displays will be shown on the remote
controller.
~
~
.
NOTE: The TEMP. Button provides a function
that allow you to set the LOCK mode. To guard
against accidental program change or unlock
the registered program, press the and
buttons simultaneously for about 3 seconds to
alternate between LOCK and UNLOCK mode.
Symbol displays indicating LOCK, the
symbol disappears indicating UNLOCK.
1
2
4
5
6
3
8
7
9
10
11
12
13
Carrier
14
15
MODE
FAN SPEED
TEMP.
AIR DIRECTION
SWING
LED
SLEEP
TURBO
CLOCK
TIMER
CANCEL
FOLLOW ME
RESET F/C
AUTO COOL DRY HEAT FAN
SET TEMP.
CLOCK
TIMER ON
TIMER OFF
SPEED AUTO LOW MED HIGH
ON
OFF
CLOCK Button: Used to initiate and/or change
the time of day setting.
TURBO Button:
Push this button on COOL/HEAT(For models
adopts PTC or Electrical heater only) mode, the
air conditioner goes into powerful cooling/heating
operation. Push again to cancel the TURBO
function.
AUTO COOL DRY HEAT FAN
SET TEMP.
CLOCK
TIMER ON
TIMER OFF
SPEED AUTO LOW MED HIGH
FOLLOW ME Display(if applicable)
Displayed when Follow Me function is activated.
Model: RG14A2/EF,
RG14A2/CEF.
FOLLOW ME Button(on some models):
Push this button to initiate the Follow Me feature,
the remote display is actual temperature at its
location. The remote control will send this signal
to the air conditioner every 3 minutes interval
until press the Follow Me button again. The air
conditioner will cancel the Follow Me feature if it
does not receive the signal during any 7 minute
interval.