![background image](http://html1.mh-extra.com/html/carrier/rtu-mp/rtu-mp_integration-manual_2562511051.webp)
RTU-MP Controller
47
Date: 06/30/2008
Vendor Name:
Carrier
Product Names:
RTU-MP
Product Model Number:
RTU-MP
Protocol Description:
The RTU-MP controller speaks the Modicon Modbus RTU/ASCII Protocol as described in the
Modicon Modbus
Protocol Reference Guide, PI-MBUS-300 Rev.J.
Further details on the Modbus implementation are described
below.
Product Description:
The RTU-MP is a factory-installed rooftop controller that is capable of speaking multiple protocols.
Serial Transmission Mode:
Supported?
RTU
Slave only
ASCII
Not supported
Communication
Types:
Baud rates:
Data Bits:
Parity:
Stop Bits:
2-wire EIA-485,
9600, 19200,
38400, 76800
8
None
1
Function Codes:
Purpose:
Used with Register
Numbers:
01 – Read Coil Status
Read Discrete Outputs
00001 - 09999
02 – Read Input Status
Read Discrete Inputs
10001 - 19999
03 – Read Holding Registers
Read Holding Registers
40001 - 49999
04 – Read Input Registers
Read Input Registers
30001 - 39999
05 – Force Single Coil
Write Discrete Outputs (single)
00001 - 09999
06 – Preset Single Register
Write Holding Registers (single)
40001 - 49999
15 – Force Multiple Coils
Write Discrete Outputs
00001 - 09999
16 – Preset Multiple Coils
Write Holding Registers
40001 - 49999
Register Type:
Range:
Function Codes Used with this
Register Type:
Float Value (FLOAT)
Single-Precision IEEE floating point
value
3 – Read Holding Register
6 – Preset Single Register
16 – Preset Multiple Register
Unsigned Integer (UINT)
0 - 65535
3 – Read Holding Register
6 – Preset Single Register
16 – Preset Multiple Register
Appendix C: Modbus Protocol Implementation Conformance Statement
Summary of Contents for RTU-MP
