![background image](http://html.mh-extra.com/html/carrier/performance-edge/performance-edge_owners-manual_2564114037.webp)
35
ADVANCED PROGRAMMING OPTIONS
Clearing the reset reminders
The thermostat tells you when it’s time to change the UV light in the evaporator
coil box connected to the furnace (if equipped), humidifier pad (if equipped),
and furnace filter. (See page 47 for more information.) When the reminder icons
are displayed on the screen, pressing and holding the
done
button for about
three seconds clears all reminders on the screen. This might not be the best
option when you have multiple reminders but have done only one of the tasks.
This option lets you reset the reminders individually.
1. Open the door.
2. Press and hold the
buttons underneath the heat
and cool setpoints
simultaneously (the two bottom
buttons on the right). The screen will display 01 and up
to three reset reminders, as enabled by your installer.
One of the reminders will flash; the display will show
the percentage of time used by that reminder item.
3. Repeatedly press the
set
button until the reminder you
want to clear flashes.
4. Press and hold the
done
button for about three seconds to remove the
reminder. The percentage associated with it will go down to zero.
Summary of Contents for Performance EDGE
