Immersion Temperature Sensors
Installation and Operation
Specifications subject to change without notice.
6 of 7
Catalog No. 11-808-632-01
#20907 –
2/20/19
Immersion Sensor Installation (continued…)
Hand tighten into well
Figure 10:
Typical Sensor Inserted
Figure 11:
BB4 Sensor Before Insertion
Figure 12:
BB2 S
ensor Before Insertion
Figure 13:
Standard J-Box Before Insertion
*As the box is hand screwed, the probe will push into the box as the probe tip bottoms out in the well. The probe can slide up to 1.6 inches
Per order
*
Sensor slides
1. Pull sensor to
extend fully
2. Insert
3. Hand tighten
Per order
*
Sensor slides
Per order
*
Sensor slides
1.
Pull sensor to
extend fully
2. Insert
3. Hand tighten
4. Pull sensor to
extend fully
5. Insert
6. Hand tighten