Installation
8
i-Vu Open Link
The i-Vu Open Link
needs...
That is unique
on the...
Notes
A router address
Open network
You set the i-Vu Open Link address on the
controller's rotary switches. (1 - 99)
NOTES
•
The i-Vu Open Link address is also used to
auto-generate the BACnet device
instance/name for the router and the
MS/TP network number for the connected
Open network. See
Configuring BACnet
device instance and network number
.
An IP address
IP Network
Use the IP Address DIP switch to choose one of
the following:
•
Use DHCP to obtain an IP address
•
Assign a
custom
The default IP settings are:
IP address (default)
•
192.168.168x, where x = router address
•
subnet mask = 255.255.255.0
•
default gateway = 192.168.168.254
To set the i-Vu Open Link address on the Open network
CAUTION
The router address must be unique on the IP and Open network.
1
If wired for power, turn off the controller's power. The controller reads the address each time you turn it
on.
2
Use the rotary switches to set the address. Set the
Tens
(
10's
) switch to the tens digit of the address,
and set the
Ones
(
1's
) switch to the ones digit. Valid addresses are 1 - 99.
EXAMPLE
If the controller’s address is 25, point the arrow on the
Tens
(
10's
) switch to 2 and the arrow
on the
Ones
(
1's
) switch to 5.
10's
1's
1
3
45
2
7
8
9
6
0
1
3
45
2
7
8
9
6
0
3
Turn on the i-Vu Open Link's power.
NOTE
The factory default setting is "00" and must be changed to successfully install your i-Vu Open Link.
