background image

GB - 4

Cooling with dehumidification

1

2

Make sure the flexible hose is not
kinked or curved too tightly and that it
is placed on a supporting  surface
(windowsill, floor...).

4

7

3

MAX.

MIN.

8

5

Move the air conditioner close to
the window and place the hose
end outside stretching the hose as
little as possible (max. extension
1100 mm).

6

9

Air flow

Air flow

Install the flexible hose onto the air conditioner. To
improve the air conditioner performance make sure that:
- the internal tips of the flexible hose are turned as

shown in the picture;

- the hose is stretched as little as possible;
- the hose is not bent, folded or throttled.

Plug the unit in.
Open the air flow direction guide vane.

The unit is now ready for cooling.
Ensure that the warm air discharged from
the end of the hose is not obstructed.

Set the thermostat to maximum
cooling by turning the control knob
clockwise.
Press the 

 button.

When the desired room temperature is
reached turn the thermostat control knob
counterclockwise until the compressor
switches off.
In this way the desired room temperature
is automatically maintained.
To switch the unit off, press the 

 button.

If the indicator light on the control panel
light up, this shows that the condensate
water collection tank is full. If this is the
case the unit automatically switches off.
To empty the tank, switch the unit off
by pressing the button 

 and remove

the plug from the power supply
socket.
Take out the full water tank on the rear
side of the air conditioner and empty it.
Then replace it correctly in its position.
Plug in the unit and wait at least 5
minutes before again restarting the air
conditioner (button 

).

The fan speed can be selected by
pressing the 

 button.

Reviews: