![background image](http://html1.mh-extra.com/html/carrier/great-ion-53khet36/great-ion-53khet36_owners-manual_2561321011.webp)
( )
8
7. USE OF REMOTE CONTROL
CLOCK ADJUSTING FUNCTION
Initial Setting or the Clock
When batteries are inserted in the remote control, the clock panel will display ‘’12:00’’
and being to flash.
Setting the clock
Before you start operating the air conditioner, set the clock of the remote control
using the procedures given in this section.
The clock display on the remote controller will show the time regardless of whether
the air conditioner is in use or not.
1.
With the remote control ON or OFF,
Press
CLOCK
for about 3 seconds, the clock time display will start to flash.
2.
TEMP.
button
•
Press this button to set time.
Forward
Backward
•
Each time you press the button, the time moves forward or backward by one minute
depending on which side you press.
The time alters as quickly as you press the button.
•
Keep pressing the button without releasing, the time moves forward or backward by
10 minutes depending on which side you press.
2.
CLOCK
button
When the right time is achieved, press the CLOCK button or release the
or
and wait for 3 seconds, the clock time stops flashing and the clock starts
3.
Readjusting the Clock
Press the CLOCK button on the remote controller
for about 3 seconds, the time of the clock display
will start to flash. To set the new time, follow 1 and 2
of "Initial Setting of the Clock".
NOTES
* The clock time must be set before operating TIME functions.
* The clock time can not be adjusted during TIME operation.
* Clock accuracy is within 15 seconds per day.
CAUTIONS
Static electricity or other factors (voltage transients )
can cause remote controller clock initialise.
If your remote controller is initialised
readjust the clock before you start operation.
2
1