( )
15
USE OF REMOTE CONTROL (Cont.)
CAUTION
•
The
↕
SWING and
↔
SWING buttons will be disabled when the air conditioner is not in operation
( including when the TIMER ON is set ).
•
Do not operate the air conditioner for long periods with the supply air direction set downward
in cooling or dry mode. Otherwise, condensation may occur on the surface of the horizontal
louver causing moisture to drop on to the floor or on furnishings.
•
Do not move the horizontal louver manually. Always use
↕
SWING and
↔
SWING button.
If you move horizontal louver manually, it may malfunction during operation.
If the louver malfunctions, stop the air conditioner once and restart it.
•
When the air conditioner is started immediately after it was stopped, the horizontal louver
might not move for approximately 10 seconds.
•
Open angle of the horizontal louver should not be set too small, as cooling or heating
performance may be impaired due to too restricted air flow area.
•
Do not operate unit with horizontal louver in closed position.
•
When the air conditioner is connected to power (initial power), the horizontal louver may
generate a sound for 10 seconds, this is a normal operation.
To set the horizontal supply air direction (left - right)
•
↔
SWING function button
•
Used to stop or start vertical louver movement and set the
desired left/right air flow direction. The vertical louver
changes 6 degree in angle for each press.
