( )
28
OPERATING AIR CONDITIONER THROUGH OPERATION PANEL OF INDOOR UNIT (Cont.)
7.7 AUTO SWING AIR VERTICAL
Function ( UP / DOWN Airflow )
:
If you want to operate automatically the horizontal supply air louvers up and down for vertical
supply airflow, use AIR VERTICAL function and apply the following steps :
Start:
1.
Press
AUXILIARY FUNCTION
button.
2.
Press
ADJUST
button
or
to select
AIR VERTICAL
function
3.
Press
AUXILIARY FUNCTION
button again to register
AIR VERTICAL
function
, then
horizontal supply louvers will swing to up and down automatically.
Stop:
If you want to stop operation of
AIR VERTICAL
function
, press
AUXILIARY FUNCTION
button,
then press
ADJUST
button
or
to select
AIR VERTICAL
function
and then press
again
AUXILIARY FUNCTION
button to cancel
AIR VERTICAL
function
.
The horizontal louvers will be automatically closed to prevent dust.
WARNING !
Manually moving the horizontal supply air louvers with hand could damage the louvers.
NOTES
•
The starting angle of the horizontal louver should not be too small, otherwise the narrow air outlet
will affect cooling or heating efficiency.
•
Do not set the starting angle of the louvers too small during cooling or drying operation
.
Otherwise, condensation may occur on the surface of the horizontal louver and cause dew
dripping.
•
During the operation, if the louvers can not swing normally, shut off the unit and unplug for
several minutes, then plug it again and restart the operation.
•
The horizontal louver may slightly vibrate during the operation. This is normal operation.
1
2
2
Horizontal Louvers
Auto Swing Air Vertical
( Up and Down )