Carrier Elegant 53QFJ36, Owner'S Manual

Page: 21 / 44

( ) 18
USE OF REMOTE CONTROL (Cont.)
TIMER OFF Function ( On – Stop Operation )
TIMER OFF Function is useful when you want to stop automatically the air
conditioner at a desired setting time ( between 0 ~ 24 hrs ), after you go to bed.
TO SET TIME OF TIMER OFF FUNCTION
1. Press TIMER OFF button. The remote control display shows
TIMER OFF indicator, the last setting time and the signal "h"
Now it is ready to reset the setting time of TIMER OFF function.
2. Press TIMER OFF button again to set the desired setting time.
Each time you press the button, the time increases by half
an hour between 0 and 10 hours and by one hour between
10 and 24 hours.
3. After setting TIMER OFF function, there will be a one half second
delay before the remote control transmits the signal to the air
conditioner. Then, after approximately another 4 seconds, the
signal "h" will disappear and the set temperature will re-appear
on the LCD display of the remote control.
TIMER OFF indicator symbol appears on the operation
panel display of the indoor unit.
EXAMPLE OF TIMER OFF SETTING
To stop automatically the air conditioner in 10 hours.
1. Press TIMER OFF button, the last setting of stopping operation
time and the signal "h" will show
on the display of the remote control.
2. Press TIMER OFF button to display 10h on the TIMER OFF
display of the remote controller.
3. After setting TIMER OFF function, there will be a one half
second delay before the remote control transmits the signal to
the air conditioner. Then, after approximately another 4
seconds, the signal "h" will disappear and the set temperature
will re-appear
on
the LCD display of the remote control.
TIMER OFF indicator symbol will illuminate on the
operation panel display of the indoor unit.
TO CANCEL TIMER OFF FUNCTION
Press TIMER OFF button until the setting time is 0.0
CAUTION
ƒ
When you select TIMER OFF function, the remote control automatically transmits TIMER OFF signal
to the indoor unit for the specified time.
Therefore, keep the remote control in a location where it can transmit the signal to the indoor unit
properly.
ƒ The effective operation time set by the remote control for TIMER OFF function is limited to the
following settings: 0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5,
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, and 24.
10 hours later
Set
On
Stop