Carrier Elegant 53QFJ36, Owner'S Manual, Page: 13 / 44

( ) 10
USE OF REMOTE CONTROL (Cont.)
AUTO MODE
START
1. Press MODE button to select the AUTO mode
on the remote control display.
2. Press TEMP buttons or to select the
set temperature on the remote control display.
Set desired temp. between 17°C to 30°C .
3. Press ON/OFF button to start
the air conditioner.
ON symbol
appears on the
remote control display.
OPERATION symbol appears on the
display panel of indoor unit.
AUTO mode indicator will illuminate
on the operation panel display
of the indoor unit.
AUTO mode starts after approximately
3 minutes.
STOP
If you want to stop the air conditioner,
Press ON/OFF button again.
NOTES
1. In the Auto mode, the air conditioner can logically choose the
mode of Cooling, Fan only or Heating operation by sensing the difference between
the actual room temperature and the set temperature on the unit control panel.
ƒ If the difference between room temperature and set temperature is higher than 1°C,
the operating mode will change automatically to Cool mode.
ƒ If the difference between room temperature and set temperature is higher than -1°C
and lower than 1°C, the operating mode will change automatically to fan mode.
ƒ
If the difference between room temperature and set temperature is lower than -1°C,
the operating mode will change automatically to Heat mode.
2. In the Auto mode, you can not switch the fan speed. It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the desired mode can be selected manually.
4. If the Eco mode is activated when the unit is operating in Auto mode, the fan speed will change into
Low speed mode immediately.
3
2
2
1