![background image](http://html.mh-extra.com/html/carrier/dgapaxx-1620/dgapaxx-1620_installation-instructions-manual_2560263003.webp)
Air Purifier Sizes 1620, 1625, 2020, 2025, 2420: Installation Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
3
A11330
Fig. 2 – Air Purifier Components
Identify Mounting Location
1. Identify a mounting orientation for the air purifier in the return air
duct (
).
IMPORTANT: Ensure airflow direction through the air purifier
matches the arrows on the face of the air purifier cartridge and
those on the label on the front of the cabinet. The air purifier can be
rotated 180° to accommodate the cabinet orientation
.
2. The location of the air purifier should be readily accessible. Enough
room should be provided for periodic replacement of the air purifier
cartridges.
Mount Cabinet
1. Turn off power to the heating and cooling system.
2. Remove the existing furnace filter and discard. Excessive system
static may result if the air purifier is used with other filtration
devices.
3. Remove the air purifier cartridge and Filter Enhancement Module
(FEM) from the air purifier cabinet (
).
4. If the air purifier is to be mounted in a side-flow application, affix
the adhesive-backed support foot to the side of the purifier that will
be on the floor, near the rear of the purifier, as shown in
Installation Manual
Installation Components
(in accessory bag)
Door (x1)
Cabinet (x1)
Enhancement Module (x1)
Air Purification Cartridge (x1)
WARNING
!
ELECTRIC SHOCK AND UNIT DAMAGE HAZARD
Failure to follow this warning could result in personal injury or death.
Only a trained, experienced service person should install the air
purifier. A thorough check of the unit installation should be completed
before unit operation. Before performing installation, service or
maintenance operations on unit, turn off all power to unit. Tag
disconnect switch with lockout tag.
WARNING
!
ELECTRICAL SHOCK HAZARD
Failure to follow this warning could result in personal injury or death.
Before installing or servicing system, always turn off main power to
system. There may be more than one disconnect switch. Lock out and
tag switch with a suitable warning label.
CAUTION
!
UNIT DAMAGE HAZARD
Failure to follow this caution may result in equipment damage.
Cabinets will support a maximum weight of 400 lb/181 kg when
installed beneath a vertical furnace or air-handling unit. When setting
furnace on cabinet, do not drop it into place. Position the furnace
correctly on the cabinet to prevent a corner from slipping down and
damaging the cabinet or its components.