Italiano
16
80AW9025
Schema applicativo
Descrizione dell'unità
Vedi fig. 1
Modulo idronico (80AWX / 80AWH)
1.
kit a 2 zone (80AW9025)
2.
collegamenti idraulici zona1 (valvole a sfera: in dotazione)
3.
collegamenti idraulici zona 2 (valvole a sfera: in dotazione)
4.
collettori zona 1
5.
collettori zona 2
6.
T1, T2, T3: terminali zona 1
C1, C2, C3, C4, C5, C6: termostati collegati ai terminali
CA: interfaccia utente (in aggiunta o separata dal modulo
idronico) o sensore o termostato collegato a kit 2 zone;
collocato in zona 1
CB: interfaccia utente (in aggiunta o separata dal modulo
idronico) o sensore o termostato collegato a kit 2 zone;
collocato in zona 2
Terminali
I terminali possono essere del tipo seguente:
circuito a pavimento
t
venticonvettori
t
radiatori
t
radiatori a bassa temperatura
t
I vari terminali hanno requisiti diversi riguardo alla temperatura
dell'acqua.
il kit a 2 zone permette di usare contemporaneamente dei
terminali che richiedono temperature dell'acqua diverse.
Vedi fig. 3
Sensore temperatura acqua TW1
1.
Pompa dell'acqua (ZONA 1)
2.
Valvola a 3 vie e attuatore (ZONA 1)
3.
Collettore
4.
Sensore temperatura dell'acqua TWB2
5.
Vedi fig. 4
kit a 2 zone
1.
Manuale d'installazione kit 2 zone
2.
Pressostato
6.
Valvola di scarico
7.
Pompa dell'acqua (ZONA 2)
8.
Scatola dei comandi
9.
Scheda elettronica
10.
Morsettiera
11.
Controllo della temperatura ambiente
Vari terminali (T1, T2... Tn) possono essere installati in un unico
locale o in più locali.
Ogni terminale può essere collegato a un termostato per
poterlo bloccare quando si è raggiunta una data temperatura.
E' possibile controllare fino a 2 locali (collocati in differenti
zone) con un'interfaccia utente o con un termostato collegato
all'unità.
In ogni zona, l'ambiente controllato deve essere quello
caratterizzato dai fabbisogni di riscaldamento/raffrescamento
più elevati.
In questo locale non è necessario installare un termostato sul
o sui terminali.
Si consiglia di installare un termostato sui terminali che si
trovano in locali con fabbisogni termici diversi.
In ogni zona, il sensore ambiente (33AW-RRS01) può essere
utilizzato al posto dell'interfaccia utente.
Se viene utilizzato un sensore, in quella zona le informazioni
sull'umidità e il comando manuale di set point temporaneo
non sono disponibili.
Si consiglia di usare l'interfaccia utente per gestire il locale,
o almeno con un sensore ambiente; così facendo, l'unità di
controllo regolerà la temperatura dell'acqua per raggiungere il
set point ed ottimizzare il confort e l'efficienza energetica.
Se non viene utilizzata l'interfaccia utente/sensore ambiente:
qualora vengano usati dei termostati, impostare curve
t
climatiche di valore leggermente superiore in modalità
riscaldamento e leggermente inferiore in modalità
raffrescamento.
se non vengono usati termostati (le temperature richieste
t
dovranno essere simili per tutti i locali), le curve climatiche
dovranno essere uguali sia per la modalità riscaldamento
che raffrescamento.
Contenuto dell'imballo
129H25_IT.indd 16
4-07-2011 10:50:53