Page 2
Follow the steps below to complete advanced setup.
Sample Wiring Diagram
HEAT-COOL/
COOLING ONLY
STEP #3
TEST OPERATION
A.
Turn the power on to the system.
B.
Press the Mode button until the
HEAT
icon
appears on the display. Press the Up or Down but-
tons until the set point temperature is 10 degrees
above room temperature. The unit will turn on.
C.
Press the Mode button and the
COOL
icon ap-
pears on the display. Press the Up or Down but-
tons until the set point temperature is 10 degrees
below room temperature. The unit will turn on.
NOTE: Most equipment has a time delay between
cool and heat cycles.
Advanced Setup
NOTE: H2 connection is not required for cooling only systems.
RS-GND
RS
RS+V
COMMON
LO FAN
COMPRESSOR
REVERSING
VALVE
HIGH FAN
HEAT
POWER
R
H2
G2
O
YG
1
C
8 Conductor 18 gage
unshielded cable from the
thermostat to the equipment.
2 Conductor 18 gage
unshielded cable from the
Time Clock to the Thermostat
Dry Contacts.
3 Conductor 18 gage
unshielded cable from the
thermostat to the remote
sensor.
CK1
GND
RS
RS+5
H2
G2
C
G1
Y
O
R
Adjust the maximum
allowable heat set point
when security is in effect.
(Step 8 only appears
if Step 9 is not 0.)
(35 to 99 F)
Locked
Setup
H
EAT
Select the security level:
0=no security in effect
1=set point range limited
2=1+ program on all times
3=2 + prohibits set point
changes
Locked
Setup
Select the cycles per
hour limit.
d=cycles per hour
limit defeated.
d1=d + defeat 5 min.
Compressor lockout.
(d, d1, 2 - 6)
Setup
Adjust the minimum
difference
between
cooling and heating
set points.
(0 to 6 F)
Setup
C
OOL
H
EAT
Adjust the deadband
from 1 to 6 degrees F.
Setup
Adjust the time of day
clock.
Select fan operation,
Fan or Fan Auto.
= Low Speed Fan
= Medium Speed Fan
= High Speed Fan
Select Heat Pump, On or Off.
Select the day of the
week.
On
Off
Am
Setup
Setup
Mo
Fan
AUTO
Setup
OFF
Setup
:
Adjust the time of day
clock.
Select fan operation,
Fan or Fan Auto.
= Low Speed Fan
= Medium Speed Fan
= High Speed Fan
Select the day of the
week.
Am
Setup
Setup
Mo
Fan
AUTO
Setup
:
NOTE: Each step number is
located at the top right corner of
the display for easy reference.
