Carrier 538FEQ009RBGA, Service Manual

Page: 3 / 94

3
STANDARD FEATURES AND ACCESSORIES
Ease Of Installation
Mounting Brackets S
Low Voltage Controls S
Comfort Features
Microprocessor Controls S
Automatic Horizontal Air Sweep S
Air Direction Control S
Auto Restart Function S
Cold Blow Protection On Heat Pumps S
Freeze Protection Mode On Heat Pumps S
Turbo Mode S
Silence Mode S
Auto Changeover On Heat Pumps S
46
_
F
Heating
Mode (Heating Setback)
S
I FEEL Function S
Smart Phone Control S
80% Heating Capacity at ---22
_
F
S
Energy Saving Features
Sleep Mode S
Stop/Start Timer S
Safety And Reliability
3 Minute Time Delay For Compressor S
Over Current Protection For Compressor S
Indoor Coil Freeze Protection S
Indoor Coil High Temp Protection in Heating Mode S
Condenser High Temp Protection in Cooling Mode S
Ease Of Service And Maintenance
Cleanable Filters S
Diagnostics S
Liquid Line Pressure Taps S
Application Flexibility
Condensate Pumps A
Crankcase Heater S
Base pan Heater S
Legend
S Standard
A Accessory
INDOOR UNITS
Fig. 1 – Condensate Pump Accessory
On high wall fan coils, the condensate pump has a lift capability of 12
ft (3.6 m) on the discharge side with the pump mounted in the fan coil
or 6 ft (1.8 m) on the suction side if the pump is remote mounted. The
pump is recommended when adequate drain line pitch cannot be
provided, or when the condensate must move up to exit.
OUTDOOR UNITS
Crankcase Heater
Standard on all unit sizes. Heater clamps around compressor oil
stump.