manualshive.com logo in svg

Carrier 52S Wall Thermostat Interface Retrofit Kit, Installation Instructions Manual

Introducing the Carrier 52S Wall Thermostat Interface Retrofit Kit! Enhance your HVAC system with this user-friendly product. Don't worry about installation; our comprehensive Installation Instructions Manual is available for free download. Visit our website to access this valuable manual and maximize the performance of your Carrier 52S Wall Thermostat Interface Retrofit Kit.

Share
Download
background image

3

OUTDOOR
FROST THERMOSTAT

FAN CYCLE
SWITCH

MOUNTING
BRACKET

THERMOSTAT
BULB

WIRING INTERFACE
KNOCKOUT

WALL THERMOSTAT CONTROL PANEL
MOUNTING SCREWS

WALL THERMOSTAT CONTROL PANEL
MOUNTING SCREW

Fig. 7 — Thermostat Bulb and Mounting Bracket

Fig. 6 — Fan Cycle Switch and 

Outdoor Frost Thermostat

Fig. 9 — Wall Thermostat Control Panel

Fig. 8 — Thermostat Wiring Knockout

Fig. 11 — Secure Control Panel (Front)

Fig. 10 — Secure Control Panel (Top)

Summary of Contents for 52S Wall Thermostat Interface Retrofit Kit









Reviews:

No comments

Related manuals for 52S Wall Thermostat Interface Retrofit Kit

Zell AC1000 Operation Manual preview
AC1000
Brand: Zell Pages: 33
DataSafe HX Series Installation, Operation And Maintenance Instructions preview
HX Series
Brand: DataSafe Pages: 4
cam HS Series Operating Manual preview
HS Series
Brand: cam Pages: 28
IBAIONDO AR-S Installation Instructions, Use And Maintenance Manual preview
AR-S
Brand: IBAIONDO Pages: 7
Ignition 63-231 Quick Start preview
63-231
Brand: Ignition Pages: 1
Vello CB-300 Manual preview
CB-300
Brand: Vello Pages: 8
York HIC4008B21S Installation And Maintenance Manual preview
HIC4008B21S
Brand: York Pages: 46
NeuLog NUL-232 Manual preview
NUL-232
Brand: NeuLog Pages: 4
aci VOC-ROOM Installation And Operation Instruction Manual preview
VOC-ROOM
Brand: aci Pages: 8
aci BACnet / Modbus IMMERSION Series Installation & Operation Instructions preview
BACnet / Modbus IMMERSION Series
Brand: aci Pages: 8
aci RT2630 Series Installation & Operation Instructions preview
RT2630 Series
Brand: aci Pages: 4
UPPAbaby Vista Chicco Manual preview
Vista Chicco
Brand: UPPAbaby Pages: 2
Omega WM 09K Service Manual preview
WM 09K
Brand: Omega Pages: 56
Trailboss QTHD519L Fitting Instructions Manual preview
QTHD519L
Brand: Trailboss Pages: 8
Yeti Cycles SB6C Owner'S Manual preview
SB6C
Brand: Yeti Cycles Pages: 17
York D*V Application Data preview
D*V
Brand: York Pages: 25
Acekool ACE-WAC8K-I User Manual preview
ACE-WAC8K-I
Brand: Acekool Pages: 33
muth signal mirror 2005-2009 Ford Mustang Installation Instruction preview
signal mirror 2005-2009 Ford Mustang
Brand: muth Pages: 9

Brands by name

Popular brands

Load more brands