![background image](http://html.mh-extra.com/html/carrier/48lcb07/48lcb07_controls-start-up-operation-and-troubleshooting_2561052052.webp)
52
APPENDIX E — EQUIPMENT/SYSTEM TOUCH NAVIGATION SCREENS
The Equipment Touch™ interface is a touchscreen device with
a 4.3 inch color LCD display that can be connected to the VAV-
RTU Open controller to view or change its property values,
schedule equipment, view trends and alarms, and more, with
-
out having to access the building automation system's server.
Fig. A — Equipment Touch Interface
This appendix provides a brief overview of the screens used to
navigate the Equipment Touch interface. For full details on in
-
stallation and setup refer to the Equipment Touch Installation
and Setup Guide.
NOTE: The System Touch™ interface when connected to the
VAV-RTU Open controller over the BACnet MS/TP network will
provide the same screens and function as the Equipment Touch.
STANDBY
Fig. B — Standby Screen
The Standby screen displays after the Inactivity Timer expires
(default is 5 minutes).
Displays:
• average space temperature
(optional static pressure or SAT)
• current controlling setpoints
• Linkage Status
The color of the Linkage Status icon changes with the
current linkage condition:
Gray – no linkage condition
Green – linkage OK condition
Red – linkage Alarm condition
NOTE: The Linkage Status icon is displayed on the Standby.
Home, and Snapshot screens.
• mode
• occupancy
• OAT (outdoor air temperature), if available
The Standby screen is not interactive. Touch anywhere on the
screen to advance to the Home screen.
HOME
Fig. C — Home Screen
Displays:
• average space temperature (optional static pressure or SAT)
• current setpoints
• mode
• occupancy status
• OAT, if available
• Linkage Status
Tap
on the right to navigate to the Snapshot screen.
SNAPSHOT
Fig. D — Snapshot Screen
Displays:
• SAT (supply air temperature), actual and setpoint
• RAT (return air temperature) actual
• static pressure, actual and setpoint
• % open economizer
• OAT actual
• VFD % speed
• active cooling stages
• active heating stages
• Comp 1, Comp 2
• Heat 1, Heat 2
• VAV-RTU Open alarms, if present
• Filter Status
• Linkage Status
Summary of Contents for 48LCB07
